Trekking dome tent - 2-person - MT900 Minimal Editions



Made for
This eco-design model, based on a double-Y dome structure, offers optimal functionality with 2 separate doors and 2 apses to store 2 x 70L backpacks. 4 pockets in the bedroom.
Sizes guide

This product is no longer in stock
Easy transportTotal weight 1.95 kg Compact & compressible bag 5.3 L Dimensions 39 x 12 x 12 cm
WaterproofWater column (Schmerber): Flysheet > 2,000 mm Bedroom groundsheet > 3,000 mm
Wind resistanceResists 70 km/h winds (force 8): Tested against gusts on a rotating platform
Easy assembly / dismantlingDome structure (double Y). Separate flysheet and bedroom. Single pole
AiringPartial mesh bedroom 2 large top ventilation areas.
Capacity60 cm width per person Bedroom height 100 cm 2 doors. 2 porches. 4 pockets
EcodesignThis product uses no dyes to reduce water pollution
Warranty5 years.All our tents are repairable. Parts and information in store or on our website
Technical Information

Why is your tent white?
Dyeing has a strong impact on the environment, which is why your tent fabric is not dyed. This underlines its technicality and signs its avant-garde character. But above all, it reduces its environmental footprint, by reducing its CO2 emissions by 15%. This tent is part of the Minimal Editions - Undyed range, which also includes an MT900 0°C Duvet sleeping bag and an MT500 Air air mattress.
Total weight 1.95 kg Separable parts to help transportation. Double canopy 550g Bedroom 660g Pole kit 500g Stakes (12 pieces) 120g Pouches 60g + 13g Guy ropes (6 pieces) 30g Repair kit (ferrule, patch) 20g To preserve your product and to increase your protection from the ground and the weather, you can complete your MT 900 2P tent with the ground sheet, reference: 8545730 (270g). Weight, volume and dimensions can vary slightly due to manufacturing tolerances
Size and living space
Bedroom length 210 cm Bedroom width 125 cm to the head and 105 cm to the feet. Bedroom height 100 cm Total height 110 cm 2 side porches around 70 cm wide and protected by a built-in sheet which shelters your equipment from the sun and bad weather. There is storage space for 2 backpacks up to around 70 litres. 4 pockets (2 side and 2 top) to keep and organise your belongings.
Architecture, tent poles and tent pegs
Lightweight, shock and frost resistant aluminium pole: 7001 T6 Yunan SD70PF Ø 9 mm aluminium. Optimised square tent pegs: “anvil” head, oversized main part, extremely resistant and lightweight (7075 T6 aluminium). Non-anodised for a lower environmental impact. Dome double Y shape: the main pole splits into 4 feet on each corner for a self-standing structure. Top pole provides volume and therefore capacity.
Separate flysheet and bedroom. Traditional pitching method: bedroom on the ground and clipped to the poles. Cover the whole tent with the flysheet. Adjust the tautness. If needed, the bedroom can be dismantled from inside. Intuitive pitching thanks to colour coding on the pole, bedroom and flysheet. When it rains, to pitch the flysheet first, you will need the compatible groundsheet (ref 8545730).
Forclaz tents are laboratory-tested: pitched tent, 200 litres/sqm/hour (3 hours, equivalent to a tropical storm). They are also tested in the field by a sample user group. 20 denier polyester (PES) flysheet and 40D polyamide (PA) groundsheet have a polyurethane coating (inside) and silicone (exterior). Seams taped with heat-sealed strips. Multi-component bedroom combining breathability, wind protection and prevents condensation
Wind resistance
We test all our tents in a wind tunnel on a turntable where we can expose each side of the tent to the wind. To test its wind resistance, the tent must be properly pitched, taut but not stretched, with all the guy ropes in position around the tent. It should remain habitable at wind speeds of 70km/h, measured near ground level. Our tents are certified by the CSTB independent laboratory in Nantes.
Ventilation and condensation prevention
Bedroom with mosquito screen for ventilation and water-repellent fabric to protect from condensation and draughts. There are 2 large top ventilation areas that you can close using a Velcro strip. To reduce condensation inside your tent, it must be properly pitched, with the fabric kept taut without being over-stretched. Two-way zips on the doors to keep them open. The use of ventilation and good air circulation limits humidity inside your tent
3-season tent: your tent will protect you from the harsh weather conditions you can encounter in the spring, summer or autumn. It will withstand light snowfall but is not designed to withstand heavy loads that would weigh on the structure. In case of snow, remember to shake your tent regularly in order to bring down any snow that has accumulated to avoid putting too much weight on the structure of your tent.
Environmental approach
The tent poles are coloured using an innovative anodising process that does not use nitric and phosphoric acids. The stakes are not coloured because they are not anodised (no acide used). They may have an unfinished or used appearance but retain all their technical characteristics. These actions help to reduce the environmental impact of your product.
Repairs and After-sales service
As designers we are concerned about the durability of our products, which is why all our tents are designed to be repairable. You will find the detachable parts (poles, bedroom, etc.) in store or in the workshop of your local Decathlon, or on the website. If you have a problem, don't hesitate to have your tent looked at in your local Decathlon store. Repair kit (ferule, patch): 20 g
Your tent is designed for itinerant bivouacking, it is therefore not designed for static use in the sun. We recommend that you avoid leaving it in the sun as the ultra-light fabrics can be sensitive to UV light, that damages them.
Information / Concept / Technology
Inside room : 65.0% Polyamide, Inside room : 35.0% Polyester Main fabric : 80.0% Polyester, Main fabric : 20.0% Thermoplastic Polyurethane Pole : 100.0% Aluminium

Stockage tips
after using or cleaning the tent, dry it thoroughly before storing to avoid bad odours and mould.
Show results for