Swimming Goggles - Xbase Print L - Clear Lenses - Blue Navy Pink Gold



Made for
Tired of not being able to adjust your goggles? They fit all faces with their patented adjustable nose bridge and simple strap adjustment for a good watertight seal.

Anti-foggingSwim with fog-free goggles – these swimming goggles have an anti-fog treatment.
Field of visionBenefit from a great field of vision between 120° and 140°.
StabilityBenefit from great stability thanks to the small lenses.
AdjustableAdjust your nose bridge (S, M, L) + strap with numbered notches and rear buckle.
WaterproofLimit water ingress with the help of compression seals on these goggles.
Warranty2 Years
Technical Information

The appearance of fogging depends on several factors, the difference in temperature between the body and the water, humidity levels, etc. Wear due to friction is one of the main causes. If your goggles fog up, dip your lenses in the water and a protective film will reform. After a certain amount of time, it is normal for the performance of the anti-fog coating to be diminished. We provide an anti-fog marker that reactivates an ageing anti-fog treatment and makes your goggles last longer.
Swimming goggle watertightness depends on the silicone seals correctly fitting the shape of your face. Before purchase, we advise you to do the "suction" test without the strap. If the goggles stay on the face by themselves via slight suction, the product will be watertight during your swim. This also enables you to spot any areas of discomfort or annoyance when the model is on the face. This model comes in size S (narrow faces) and size L
These swimming goggles fit the morphology of your face without needing to be over-tightened. Goggles that are too tight can cause discomfort, leave marks and even create water inlet holes. It is not necessary to press against the lenses with your hands, a light suction effect is usually enough for swimming sessions without water inlet holes. The straps ideally should rest 2-3 cm above your ears. This position will optimise the grip and comfort of the goggles.
We recommend: - rinsing your goggles (only if necessary) by simply dipping them in water - avoiding directing powerful jets of water at the inner surface of the lenses. - storing the goggles in their case after each session to prevent damage to the lenses (on the inner surface as there is an anti-fog coating and on the outer surface to prevent scratches) - not exposing them to temperatures of over 60°C DO NOT TOUCH / RUB THE INSIDE OF YOUR LENSES
Complies with standard: Q/BT 4734 - 2014, all Nabaiji swimming goggles protect against harmful UVA and UVB rays when used normally, regardless of the lens tint. Looking directly at the sun is dangerous and can lead to irreversible eye damage.
Information / Concept / Technology
Joint/Gasket : 100.0% Silicon Lens : 100.0% Polycarbonate Buckle : 100.0% Polyurethane

Product test
The Nabaiji swimming goggles comply with the EPI regulation 2016/425. Our products are tested and approved by independent laboratories. Goggles intended for swimming at the surface.

Stockage tips
After use, store the goggles in their case or plastic pouch. Important: Do not touch the inside of the lenses to avoid damaging the anti-fog treatment.
Show results for