Men’s Hiking Shoes (WATERPROOF) MH100 - Black

8553119

QUECHUA

From

₹ 3,999.00

Men’s Hiking Shoes (WATERPROOF) MH100 - Black

Made for
These hiking shoes have all you need for the mountains: a sole with excellent grip, a good fit with its waterproof Mid-height upper, a protective stone guard at the front and full cushioning.
Sizes guide

Advantage
TractionNon-slip rubber outsole with 4mm gripping studs.
Impact protectionDurable rubber guard to the forefoot.
WaterproofWaterproof and breathable membrane lining: your feet dry for 3h in all weather
FitHigh-top upper. Locking hooks to spread lacing between the foot and ankle
CushioningFull length cushioning thanks to an EVA midsole.
Lightweight440 gr per shoe in size 43
Warranty2 Years
Technical Information

1
WHICH HIKING FREQUENCY AND INTENSITY?
We have classified our product in terms of performance and function to suit the 3 levels of Mountain Walking: - Occasional: a dozen hikes a year for approximately 3 to 4 hours, under 10 km and under 700m of vertical distance. - Regular: twenty outings a year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of vertical distance per outing. - Intensive: for over 20 outings per year. For over 6 hours, over 20 km, 1200 to 2000m of vertical distance per outing.
2
SUSTAINABLE DEVELOPMENT INFORMATION
For the fabric on the cuff lining and on the inner sole coating of these boots, we dye the thread during manufacturing to reduce the environmental impact. Textile dyeing requires a lot of water but also produces waste water from the dye baths. To reduce this environmental impact, we use a mass pigmentation process that involves adding the colour pigments when the yarn itself is produced.
3
SOLE WITH GRIP
The grip of our soles is certified. To be awarded it, the shoes must pass laboratory tests to assess the grip rate on different surfaces (Smooth, Rugged, Dry, Wet). To validate these tests, we assess the quality of our soles in the field, the mountains, by a panel of representative testers over 500 km.
4
Waterproofing test
In a laboratory, the boot is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry. Then we confirm in the field or under the rain, that the shoe meets its promises.
5
Making waterproofing last longer
To keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles and sand from getting in. We advise re-waterproofing your boots twice a year using a re-waterproofing agent (search for ‘waterproofing’ on our Decathlon website) which will help you restore the original water-repellent qualities and help prevent stains on the outside.
6
Which size should I select?
The most important thing is to try on several sizes and styles of boots to find the one most suited to you! You can take a size above your usual one to prevent the toes from bumping into the toe box when going downhill, provided the foot is properly supported to avoid friction. Tip: keep your toenails short and, before a long descent, check that your lacing is tight enough to prevent your foot from sliding forwards inside the boot.
7
BUYING TIPS / HOW DO YOU TRY YOUR BOOTS ON?
Some Decathlon stores have a test route. 1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces, taking care to correctly balance the tightening. 3. Check two points: - the heel does not come up before the boot when you walk uphill. - the foot does not slide and the toes do not press against the front when going downhill. 4. Try on several sizes and models. Break them in gradually to adapt them to your foot.
8
Which socks?
A waterproof boot will be less breathable than a non-waterproof boot. Socks like the MH500, MH520 and MH900 with a high or medium upper (adapted to the height of the boot) are therefore preferable for wicking away perspiration and reducing friction.
9
Optimise the capabilities of your boots: replace your insoles!
The original insole in your boots is designed to accommodate most feet. A change of insole can bring: 1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide heat and/or cushioning. 3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.
10
How should you look after your boots?
- Leave to air-dry. - Remove dry mud with a stiff brush. - For stains, clean with a brush and a little warm water - Leave to dry - Spray with a re-waterproofing agent to restore the water-repellent properties of the upper.
11
HOW DO YOU AVOID BLISTERS?
Information / Concept / Technology
Composition
Outer sole of : 67.0% Rubber - Nitril Butadiene Rubber, Outer sole of : 33.0% Ethylene Vinyl Acetate Upper of : 82.9% Polyamide, Upper of : 10.0% Rubber - Nitril Butadiene Rubber, Upper of : 7.1% Polyurethane Lining and sock of : 100.0% Polyester

Product test
All our models are tested by users representative of our target market in conditions identical to those you encounter yourself when using them. We believe that carrying out 'real-life' testing is the only way to design and continuously advance the technical relevance and design of all our Quechua products.

Stockage tips
Store in a dry place away from sunlight.
Show results for