Football Ball Size 4 F100 Light - White/Orange/Blue

We watched players on the pitch to design this hybrid football which combines the comfort of a machine-stitched ball with the durability of a hand-stitched ball. The wound bladder (2 km of thread is wrapped around the bladder) ensures durable inflation and better sphericity.

This ball is considered light because it is about 15% lighter than a regular size 5 football. What difference does that make? Thanks to its weight, young football players can kick or head the ball more comfortably. It's also easier to aim and execute long passes.

Between 68.5 and 69.5 cm.

We measure the football's sphericity at 4500 different points and then examine any differences. If the difference is greater than 1.5% (FIFA Pro Standard), our engineers are tasked with improving the sphericity to guarantee consistent bounce.

We inflate the ball to the recommended pressure (meaning 0.8 bar). 72 hours later, the ball must not lose more than 15% of its pressure, meaning approx. 0.1 bar. The pressure after 72 hours must, therefore, be at approx. 0.7 bar. This also means that it is quite normal for a ball to lose pressure after a few days.

We simulate rainy playing conditions in a lab, leaving the ball to sit in 2 cm of water on a pivoting support whilst subjecting it to 250 compressions. By the end of the test, the ball must not have absorbed more than 15% of its weight, which in the case of this F500 Light Size 5 is approx. 50 g.

Between 125 and 155cm with a maximum difference of 10cm between the ball's highest and lowest bounce. Each ball is dropped 10 times on a steel plate from 2 metres in height.

The most demanding test that this ball is subjected to is the machine shot test. Withstands up to 2500 shots against an inclined concrete surface at 50 km/h at a distance of 2.5 m. At the end of the test, we check: - the ball's general state: stitching must withstand this test - the circumference: must not have increased by more than 1.5 cm. - the sphericity: it must not have varied by over 1.5% - the pressure: loss of pressure must not exceed 0.1 bar.