Stand-Up Paddle & Kayak High-Pressure Pump

1/ Stand on level and solid ground 2/ Check that the hose is attached on the INFLATE side 3/ Connect the hose to the inflatable 4/ Turn the orange ring to position 1 5/ Inflate the craft until it becomes difficult (approx. 8 PSI) 6/ Turn the orange ring to position 2 7/ Finish inflating to the recommended pressure. Pump supplied with 2 seals on the inflation nozzle to fit most valves on the market. (orange: ITIWIT / black: other)

Use the 2 fastening clips to attach the hose and pump together. Do not stand on the pump or the hose. Clean off any sand, it can damage the seals.

Height: 60 cm Width: 27 cm Depth: 12 cm Hose length: 100 cm 60 mm diameter piston for easy high-pressure inflation. Easy to inflate for everyone. Pump weight: 1.2 kg Volume of air transferred: Mode 1: 2.1 litres Mode 2: 1.2 litres

In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with: a "Mini Boston" adapter to inflate the kayak seats a "Boston" adapter to inflate low-pressure kayaks, inflatable air mattresses and tents. A nozzle adapter to inflate certain kitesurfing wings.