Made for
Fed up with swimming goggles that let water in? Compact, with their double strap and 3 nose bridges, the BFIT goggles offer a wide adjustment range for optimal support.
Sizes guide

This product is no longer in stock
Anti-foggingSwim with fog-free goggles – these swimming goggles have an anti-fog treatment.
StabilityBenefit from excellent hold with the compact design of these BFIT goggles.
AdjustableAdjust these goggles thanks to the 3 nose bridges and the double strap.
Field of visionBenefit from a standard field of vision less than 100° in well-lit places
WaterproofLimit water ingress with the help of compression seals on these goggles.
Warranty2 Years
Technical Information

The appearance of fogging depends on several factors, the difference in temperature between the body and the water, humidity levels, etc. Wear due to friction is one of the main causes. If your goggles fog up, dip your lenses in the water and a protective film will reform. After a certain amount of time, it is normal for the performance of the anti-fog coating to be diminished. We provide an anti-fog marker that reactivates an ageing anti-fog treatment and makes your goggles last longer.
The watertightness of the swimming goggles is dependent on the proper fit of the skirts with the shape of your face. Before purchase, we advise you to do the "suction" test without the strap. If the goggles stay on the face by themselves via slight suction, the product will be watertight during your swim. This also enables you to spot any areas of discomfort or annoyance when the model is on the face. One-size model with 3 interchangeable nose bridges
These swimming goggles fit the morphology of your face without needing to be over-tightened. Goggles that are too tight can cause discomfort, leave marks and even create water inlet holes. It is not necessary to press against the lenses with your hands, a light suction effect is usually enough for swimming sessions without water inlet holes. The straps ideally should rest 2-3 cm above your ears. This position will optimise the grip and comfort of the goggles.
We recommend: - rinsing your goggles (only if necessary) by simply dipping them in water - avoiding directing powerful jets of water at the inner surface of the lenses. - storing the goggles in their case after each session to prevent damage to the lenses (on the inner surface as there is an anti-fog coating and on the outer surface to prevent scratches) - not exposing them to temperatures of over 60°C DO NOT TOUCH / RUB THE INSIDE OF YOUR LENSES
The colour of your goggles should be suited to your swimming location and its lighting. If you swim outside or in a swimming pool with bright lighting, prioritise smoked lenses for greater comfort and to limit the glare. If, however, the pool is quite dark with low lighting, winter evenings for example, use clear lenses. The BFIT swimming goggles are available with different lens tints.
Complies with standard: Q/BT 4734 - 2014, all Nabaiji swimming goggles protect against harmful UVA and UVB rays when used normally, regardless of the lens tint. Looking directly at the sun is dangerous and can lead to irreversible eye damage.
Information / Concept / Technology
Lens : 100.0% Polycarbonate Joint/Gasket : 100.0% Styrene Ethylene Butadiene Styrene Strap : 100.0% Silicon Buckles : 100.0% Polycarbonate Packaging : 100.0% Polypropylene

CE marking: It certifies that the protective eyewear complies with the essential requirements of the European directive which concerns it and satisfies the certification procedures which apply to it.

Product test
The Nabaiji swimming goggles comply with the EPI regulation 2016/425. Our products are tested and approved by independent laboratories. Goggles intended for swimming at the surface

Stockage tips
After use, store the goggles in their case. Important: Do not touch the inner surface of the lenses as this could destroy the anti-fog treatment
Show results for