Men's Waterproof Mountain Trekking Jacket - MT500




₹ 7,999.00


₹ 2,999.00

Reduced price! Men's Waterproof Mountain Trekking Jacket - MT500

Made for
Waterproof jacket using the combination of a lightweight, breathable fabric and a sturdy fabric to help protect you from the elements.

This product is no longer in stock
Abrasion resistanceUse of a robust fabric (147 g/sqm, 70 denier) on the areas needing protection
WaterproofCombination of 2 fabrics resistant to 20,000 mm water pressure before washing.
BreathabilityRET < 8 for the lightest fabric, RET < 12 for the most resistant fabric
VentilationDouble slider, water-repellent ventilation zip under the arms.
Freedom of movementPreformed elbows, adjustable hood, pockets accessible with a backpack
WeightThe hybrid structure reduces the weight to 530 g in size L.
Compact designFolds into its hood and stays compressed with a hook.
Pockets2 hand pockets (with a mobile phone compartment in the right one)
Warranty2 Years
Technical Information

Hybrid structure
Combination of a durable and protective fabric (147g/m2, 70 denier) on areas to be protected from friction (shoulders, outer arms, front and back hem) and a light and breathable fabric (109 g/m2), 20 denier) elsewhere. Back 2 cm longer than the front to ensure maximum protection and to cover the second thermal layer underneath if necessary.
Completely adjustable hood height and depth. Semi-rigid visor with integrated mesh headband to provide a high level of protection and support. The high stand-up collar effectively protects the lower face.
2 hand pockets that remain accessible even when carrying a backpack and a YKK AquaGuard waterproof zip. There is a mesh mobile phone pocket inside the right pocket.
Front zip
Features a waterproof YKK AquaGuard zip along the entire length with an inside flap providing protection from the wind. Folded underflap on the hem to make zip fastening easier. Double slider lets you open the jacket from the bottom. Soft fabric flap at the top of the collar to protect the chin.
Double tightening with an elastic cord and toggle at the hem. Velcro-adjustable sleeves covering the wrist. The wrist fob makes it easy to wear gloves with the jacket.
Water resistance of the fabric
We measure a fabric's resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. Here are the waterproof values for the the MT500 jacket: 25,000 mm (or 25,000 Schmerbers) before washing for the lightest fabric (11,000 mm after 5 washes) 20,000 mm (or 20,000 Schmerbers) before washing for the strongest fabric (17,000 mm after 5 washes)
Water resistance of the jacket
The water resistance of the jacket was tested under rainfall of 450 litres of water/m²/hour for 4 hours. This test reproduces the conditions of a thunderstorm in the mountains.
Fabric breathability
To find out if a fabric is breathable, we test its evaporative resistance RET (ISO 11092 standard).The lower the fabric's resistance, the more water vapour evaporates, and the higher the fabric's breathability. It is considered that if: RET < 9 = very breathable fabric 9 < RET < 12 = breathable fabric. Here are the breathability values for the the MT500 jacket: > Most durable fabric: RET < 12 (or 3,621 g/m²/24h, standard JIS1099A) >Lightest fabric: RET < 8 (or 2,972 g/m²/24h, standard JIS1099A)
Water-repellent properties information
The water-repellent property of a fabric is its ability to let water run off its surface without absorbing it. This prevents the fabric from soaking up water and keeps it lightweight and breathable. The fabric is made water-repellent by treating its outer surface, however this property may deteriorate with use. The water-repellent property can be reactivated by putting the jacket in the tumble dryer for 10 minutes on low heat. You can also use the FORCLAZ re-waterproofing spray (ref 855490)
How to look after a waterproof jacket?
Find out our care tips
Information / Concept / Technology
Outer fabric : 100.0% Polyester Main fabric : 100.0% Polyamide Yoke : 100.0% Polyamide Pocket : 94.0% Polyester, Pocket : 6.0% Elasthane Coating : 100.0% Polyurethane

Product test
This jacket has been tested and validated in the field in real-life conditions. It was worn for 5 weeks by several people who undertook the Grande Traversée des Alpes (GTA) in late spring 2017.
Show results for