Cycling Light Front/Rear LED FL 920

8405195

ELOPS

Made for
A powerful LED light that can be recharged through USB. As you want for white in front or rear in red! Easily attaches to your bike's handlebars.
Sizes guide

Advantage
Visual efficiencyPower: 11 lux Wide beam. Effective at sustained speeds on roads and trails
VisibilityPower: 200 lumens Continuous or flashing mode
Autonomy1½ to 3 hours of battery life. Charges via USB
Versatility5 modes (WHITE and RED) Universal elastic strap (included)
WaterproofIPX4: withstands spray and heavy, persistent rain.
Warranty2 Years
Technical Information

1
Visual efficiency / Visibility
Thanks to feedback provided by cyclists and other road users (drivers, pedestrians, etc.), our design teams have defined optimum features linked to cyclists' visibility. With one purpose in mind: ensuring cyclists' safety. This light is ideal for cyclists who need to SEE what is around them at a fast pace (up to 25 km/h): the road in front of them, the verge and even branches at head height.
2
Power
Power mode:1.5 hours Eco mode: 3 hrs. Flash: 3 hours Rear steady mode: 2 hours Rear flashing mode: 3 hrs. Charge time: 2 hours from a USB port.
3
Performance
Battery capacity: 1000 mAh (guaranteed for 500 cycles) This light does not have an approved lens for focusing the beam on the ground. This results in a wide, diffused beam a (low lux but high lumens). Its strong light output therefore lets you not only SEE but also BE SEEN. WHITE MODE White boost 11 lux / 200 lumens White eco 14.5 lux / 100 lumens White flash 11 lux / 200 lumens RED MODE Red steady 8 lumens Red flash 8 lumens
Information / Concept / Technology
Composition
Inside shell - Main fabric : 60.0% PCBA, Inside shell - Main fabric : 40.0% Battery - Li Po Strap : 50.0% Polyoxymethylene, Strap : 40.0% Silicon, Strap : 10.0% Thermoplastic Polyethylene Main part : 100.0% Aluminium Lens : 100.0% Polycarbonate Screws : 100.0% Steel

Test
The project team and 40 testers for this product are all keen cyclists.

Product test
Lab tests are conducted to approve components: batteries, battery life, UV resistance, durability, etc. The final product is then tested to simulate the durability of the assembly over time. The bike light is fitted to a test bike to reproduce uneven movement over roads for several thousand cycles.

Stockage tips
Recharge the battery regularly to prevent long periods of inactivity. Avoid storing in a cold environment (such as leaving the light on your bike outside in winter).
Show results for