Men’s Snow Jacket Warm & Waterproof SH100 X-WARM - Blue

We developed your jacket for wintry conditions: cold, rain and snow. The insulation is made from 150 g/m² wadding on the body and 100 g/m² on the arms combined with a fleece.(synthetic insulating component thanks to the air that it stores in its fibres) We added an inside flap under the zip fastening to block incoming cold air. The toggle tightening at the jacket hem is the finishing touch to ensure your jacket is comfortable down to -10°.

Your jacket is designed with a waterproof outer component that keeps out water and wind. To keep you warm in winter you must also protect your extremities (head, hands, feet). The warm hood, the Velcro fastenings at the cuffs and the high collar prevent the cold from entering. Two warm pockets in extremely soft fleece protect your hands from the cold.

We designed your jacket with a coating on the outer fabric to make it waterproof. A fabric’s resistance is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with waterproofing resistance of 2,000 mm resists the pressure of 2,000 mm of water (Schmerbers). Validated in a test under 60 L/m²/hour of water, roughly equivalent to a two-hour rain shower.

Your jacket is waterproof thanks to its 100% taped seams. Waterproof tape is added to the seams inside the garment to make them watertight so that water cannot enter through the more vulnerable areas. We have checked the waterproofing with a specially designed shower test to reproduce conditions under a 2-hour rain shower. We also wore it in the field in all weather conditions to make sure that it is suited to your activities.

Lots of spaces to keep all your accessories safe and handy (tissues, keys, phone, etc.) during your hikes. Two lined pockets under a flap with a press stud fastening on the outside and a secure pocket with rip-tab fastening inside. A secure zip pocket also available on the chest.

The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. As a result, the fabric does not soak up water and stays light, breathable and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment (we recommend with every wash). Products (spray or liquid) for this purpose are available in our stores.

Jacket designed with sufficient volume inside so that a warm second layer such as fleece or light down can be worn. Its classic cut is ideal for protecting you from the cold and wind during your winter hikes on all types of terrains.

This product is guaranteed for 2 years from the date shown on the sales receipt. A product covered by the warranty will be exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear and improper use.

To dress properly in winter, whatever your activity, we recommend using the 3-layer principle: layer 1: The high-tech base layer transfers moisture away from the body to keep your skin dry. layer 2: The second layer (fleece, sweater) provides warmth and transfers moisture outwards. layer 3: The jacket protects from the outdoor conditions: rain, snow, wind. The whole outfit must be breathable in order to eliminate moisture.

The environmental impact of the product is calculated over its entire life cycle and using various indicators. A score from A to E is given to help you easily identify the more eco-friendly products by comparing products of a similar type. Decathlon actively promotes this initiative. Find all our sustainability initiatives at http://developpement-durable.decathlon.com/