Sport Mask Light+ - Blue

Advantage

FiltrationFilters and protects from fine particles (PM 2.5)

StabilityStable and comfortable during sport.

Easy breathingThe mask has good ventilation for easier breathing.

Warranty2 Years

Technical Information

Operating instructions:

1. Hold both sides of the mask (nose clip pointing up) and face the mask. 2. Position the bottom of the filter against the chin and the rest of the filter so that it covers the face. 3. Bring the two straps behind the neck and position them. Adjust the stretch for comfort. 4. Adjust the nose clip so that it hugs your nose. 5. For greater stability during exercise, fit the head strap over the head.

Check before use:

Once the mask is properly fitted, test by inhaling and exhaling to ensure that the mask fully covers the face and does not let air in. If necessary, adjust the nose clip, rear strap, or head strap again.

Filter replacement instructions:

1. Replace the filter if you feel resistance to breathing or if it is dirty 2. Grasp the inner and outer parts of the valve, turn them in opposite directions, and remove them. Remove the used filter. 4. Place the new filter inside the mask with the nose clip pointing upwards and align the holes 5. First insert the inner part of the valve, then attach the outer part and close. 6. Complete the same procedure for the other valve.

Information / Concept / Technology

Composition

Main fabric : 100.0% Polyester (PES) Buckles : 100.0% Polyoxymethylene (POM) Lower Part - Main Fabric : 100.0% Polypropylene (PP) Winding : 60.0% Polyvinyl chloride (PVC), Winding : 40.0% Aluminium Valve : 100.0% Polypropylene (PP) Hook and loop tab : 100.0% Polyamide 6 (PA6) Hem : 77.0% Polyamide 6 (PA6), Hem : 23.0% Polyurethane (PU) Elastic Band : 80.0% Polyester (PES), Elastic Band : 20.0% Rubber - Natural Rubber (NR) - Latex Net : 64.0% Polyamide 6 (PA6), Net : 36.0% Polyurethane (PU)

Product test

GB2626-2006 KN95

Sport Mask Light+ - Blue

SUPPORT

DECATHLON B2B

CUSTOMER