Stand-Up Paddle Double-Action High-Pressure Hand Pump 20 psi - Orange

8387655

ITIWIT

Made for
The double-action high-pressure pump is designed to easily inflate SUPs to pressures of up to 20 PSI.
Sizes guide

Advantage
Ease of useTwo progressive modes of operation: 1/ high volume 2/ high pressure
PowerRobust structure for high pressure. Wide handles.
Parameter measurementBuilt-in 3-20 psi pressure gauge. Starts working once the SUP takes shape (3psi)
RobustnessHeavy-duty hose with rotating head to prevent it disconnecting during inflation.
WarrantyAvailability of spare parts essential to the use of the product: 2 years
Technical Information

1
SUP inflation tips
1/ stand on flat and solid ground 2/ screw the hose onto the pump 3/ connect the hose to the SUP (valve raised) 4/ close the cap of the pump body, its double action operation delivers 3.6 L with each up and down stroke 5/ inflate the SUP until it reaches its full volume 6/ as soon as pumping becomes difficult, open the cap, the pump then operates in single action (1.8 L with each down stroke) 7/ inflate to the SUP's recommended pressure.
2
Storage tips
Roll up the hose, do not fold it Store the pump body and hose flat in the SUP bag. Do not stand on the pump or the hose. Clean off any sand, it can damage the seals.
3
Technical dimensions
Height: 61.5 cm Width: 27.8 cm Depth: 10 cm Hose length: approx. 120 cm 70 mm diameter piston for easy high-volume inflation but high-pressure inflation takes a bit more effort. Pump weight: 1.4 kg
Information / Concept / Technology
Composition
Handle : 100.0% Polypropylene Frame : 100.0% Polypropylene Tube/Valve connector : 100.0% Polyethylene Air chamber : 100.0% Aluminium

Stockage tips
Unscrew the hose, roll it up on itself without folding it. Store it flat with the pump.
Show results for