Running Water Bladder 2L



Made for runners wanting to hydrate easily during a workout.
to replace your old water bladder.Try the new fastening system!

This product is no longer in stock
Capacity2 litres
Easy maintenancevery wide fastening / opening system
WatertightTeat locking mechanism
Warranty2 Years
Technical Information

pocket size:
38cm X 18cm
hose length:
100cm - you can cut it to the required length
Information / Concept / Technology
Film : 70.0% Ethylene Vinyl Acetate (EVA), Film : 30.0% Polyethylene (PE) Tube : 100.0% Thermoplastic polyurethane (TPU) Handle : 100.0% Polycarbonate (PC) Sliding bar : 60.0% Ethylene Vinyl Acetate (EVA), Sliding bar : 40.0% Polyethylene (PE) Teat : 100.0% Styrene Ethylene Butadiene Styrene (SEBS) On/Off System : 100.0% Polyethylene (PE) Tube/Valve Connector : 100.0% Polyethylene (PE) Film/Tube Connector : 60.0% Ethylene Vinyl Acetate (EVA), Film/Tube Connector : 40.0% Polyethylene (PE)

Product test
Empty the air from your water bladder. Shocks while running shake the rucksack and water pouch. If there is air in the water pouch, you will hear the water splashing throughout your run. To avoid this, remove the air when filling the pouch: turn it upside down and let the air go up to the tube, then suck it out. Silence!

Stockage tips
do not leave water in the bladder more than 24 hours. Rince well with clean water after use and allow to dry before storage.

Maintenance tips
empty water from bladder, clean it with dish washing liquid and rinse thoroughly, dry all elements while taking care to unscrew the tube. Do not put in dishwasher.
Show results for