What type of padding is used to provide warmth?
To help keep you warm, we use recycled wadding insulation (60g/m² on the arms and 100g/m² on the body). This synthetic polyester-based wadding traps more or less air, depending on the size of its fibres, in order to insulate you from the cold.
What other components keep you warm, in addition to the filling?
As well as its filling, your jacket's waterproof zips, collar, hem tightening and adjustable cuffs offer better protection against the cold and damp for a warmer feeling.
"Coated" jacket: what are the advantages of this coating?
The coating is a waterproofing material spread over the inner surface of a fabric. It prevents water from seeping into the garment but allows the water vapour produced by the body's physical activity to escape. So you stay dry for greater comfort while practising your sport.
How is the waterproof rating of the jacket measured?
The resistance of a fabric to water pressure is expressed in terms of the height in mm of a water column that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A fabric with a waterproof rating of 5,000 mm is therefore resistant to the pressure exerted by a 5,000 mm column of water.
Which parts of the jacket protect me from bad weather?
The 150 jacket has been developed with a sophisticated component and assembly that prevent water from entering and reduce wind chill to help you cope with the weather conditions (rain, snow, wind, etc.) We validated the waterproofing of this product in the field in various weather conditions for several days.
What is the water repellent feature of my jacket for?
The water repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This jacket features water-repellent components that extend its weather resistance. The fabric is made water-repellent by treating its outer surface. However, this property may deteriorate with use.
How to restore the water repellent feature of your jacket?
Bear in mind that the water repellent feature can be reactivated. To do this, put the jacket in the dryer on a synthetic programme for 10 to 15 minutes. You can also use a waterproofing spray (sold in our stores): spray the product evenly over the entire garment and allow to dry for 10 to 12 hours.
What is a "breathable" jacket?
This garment wicks away the water vapour produced by your body when exercising. To find out if a fabric is breathable, we measure its total evaporative resistance RET (test based on the ISO 11092 standard). The lower the RET, the more breathable the fabric. The 150 jacket has an RET of 7. However, it is the technical solutions (zips, vents, mesh) that Wedze uses, which reduce the condensation inside the garment and maximise breathability.
What is the fit of the 150 jacket?
Regular fit. The sides of the jacket hang down straight and remain parallel without conforming to the shape of your bust. The interior volume means this jacket can be worn in combination with a first and second technical layer.
How to dress to stay warm on the slopes?
To make sure you stay warm and dry, we recommend using the 3-technical-layer rule: - Layer 1 or a second skin, to stay dry. - Layer 2 or an insulating layer, to keep the heat in. - Layer 3 or a protective layer, to protect against bad weather.
How can I prevent snow from getting in when I fall?
The adjustable jacket hem and elastic sleeve cuffs keep out snow and draughts while skiing, and especially in case of a fall.
A score for comparing the products' environmental impact
The product's environmental impact is calculated over its entire life cycle using different indicators. An overall score from A to E is given to help you easily identify the most eco-friendly products by comparing products of the same type (T-shirts, trousers, backpacks, etc.) Decathlon is committed to displaying the environmental information of its products. For further information: http://sustainability.decathlon.com/