Men’s Waterproof Hiking Boots NH150 WP

The sole’s design is the result of long research carried out in our labs. It is composed of a specific rubber formula which optimises grip and traction. We systematically look for the best compromise to operate on soft (forest type) and harder (coastal type) hiking trails. Road use can accelerate the wear and tear of your boots and cause you discomfort. They are not suitable for mountain walking.

Laboratory tests were conducted to test the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing. These tests allow us to improve the quality of our products and prevent premature wear of our hiking shoes.

NH150 WP boots have been tested for 2000 flexes in the laboratory. This means they will stay waterproof for a 2-hour hike. During the waterproofing test, we test 3 levels of waterproofing: - 2000 flexes, about 2 hours of hiking - 4000 flexes, about 4 hours of hiking - 8000 flexes, about 8 hours of hiking We recommend you use a re-waterproofing spray several times a year to regain the original water-repellency and prevent

Laboratory- and field- tested, these shoes have a membrane to ensure optimal waterproofing and breathability. First, the shoe is immersed in water while internal air pressure is applied to check that no bubbles form on the surface of the footwear. Next, shoes are fitted to a mechanical arm that simulates walking and half immersed in water so we can test that the inside remains perfectly dry.

Try on both shoes, standing up, with the socks worn for hiking. Try on several models or sizes if necessary. Check two comfort points: - the heel seating - the front of the foot on a downward slope Avoid any pressure points when fitting. Don’t hesitate to walk around to test the comfort and support. Gradually start using you shoes during your first few hiking trips to break them in.

These shoes are slightly breathable, but not enough to evacuate all humidity created by your perspiration. We therefore advise you to use Hike 100 Mid socks: they contain moisture-absorbing cotton and have a reverse terry-knit construction under the sock that wicks moisture away from your foot. They are also high enough to protect your ankle from the shoe. It is an excellent combination to reduce the chance of blisters.