Sika 100 Grip Fixed Blade Knife Black

8494033

SOLOGNAC

Made for
Looking for an affordable knife that will never let you down? This very sharp knife with a Scandi grind is very tough thanks to the 3/4-tang assembly, it's ready for any challenge!
Sizes guide

Warning: Last items in stock!

Advantage
Robustness3/4-tang assembly means that the knife can withstand a lot
Corrosion resistanceNo need to worry about rust, the blade is made of 5Cr15 stainless steel
Ergonomic gripSits nicely in the hand thanks to the shape and the rubber grip
Easy maintenanceEasy sharpening thanks to the Scandi grind on the blade
Easy transportCarry your knife securely in the plastic sheath with its safety lock
Warranty2 Years
Technical Information

1
Dimensions and weight
Weight: 175 g Blade length: 10 cm Overall length: 22 cm Blade thickness: 2.5 mm Handle length: 12.2 cm Handle thickness: 2 cm Blade angle: 11° Type of steel: 5Cr15 Hardness: 56 HRC Blade shape: drop point (specific to hunting) Sharpening: Scandi Finish: Sand-blasted, Teflon for the black model Handle: plastic rubber grip Hole for wrist strap Supplied with a rigid plastic case and belt attachment, compatible with MOLLE and X-ACCESS systems
2
Easy to sharpen
The Scandi grind enables you to sharpen your knife very easily. Just place the blade flat on your sharpening support such as a steel or a stone, then, keeping the blade flat, sweep the blade down the stone along the whole length of the edge. This way you will always keep to the initial angle so as to obtain the perfect edge!
3
5Cr15 stainless steel
Our engineers have chosen 5Cr15 stainless steel for this knife for three reasons: - the steel is hard enough to keep an edge for a good length of time, such as for cutting branches or preparing game for a couple of hours. - the steel is soft enough to allow easy sharpening thanks to a hardness of around 56 HRC, and to regain a sharp edge within a few passes on a sharpening tool - the steel offers good resistance to corrosion thanks to its chemical composition.
4
Plastic transport sheath
For your safety, always keep your knife in its sheath when you are not using it. And to keep you safe while you're on the move, our design team has devised a system to lock the knife in its case. To take the knife out, just press with your thumb while pulling the knife out of the sheath. To put your knife away, push it into the sheath until you hear a click.
Information / Concept / Technology
Composition
Outer shell : 100.0% Acrylonitrile Butadiene Styrene Blade : 100.0% Stainless Steel Handle : 100.0% Acrylonitrile Butadiene Styrene
Show results for