2L Hydration Bladder

8399482

ROCKRIDER

From

₹ 499.00

2L Hydration Bladder

Made for
Slip the 2L water bladder into your hydration backpack for 4 hours of mountain biking. The bite valve is angled at 45° to make it easy to drink from. It has a wide opening for easy cleaning.
Sizes guide

This product is no longer in stock
Advantage
CapacityBring up to 2L of water with you for rides of up to 4 hours.
Mouth comfortThe lockable bite valve is bent at 45° so it's easy to put in your mouth.
Easy maintenanceThe wide zip opening allows you to easily clean and fill it.
Warranty2 Years
Technical Information

1
How to look after your hydration bladder
After each outing, rinse and dry the hydration bladder. To make things easier, use the cleaning kit (code: 5935596) with bottle brush and a drying rack.
2
Adjustable tube and valve for increased comfort.
You can cut the tube to your preferred length. To do this, remove the bite valve, place the tube in hot water to soften it, cut it to the desired length and put the bite valve back on. The valve is lockable to prevent leaks when not in use. On MTB rides, it won't drip, even when in the open position. To get a good flow when drinking, pinch the valve with your mouth and suck.
3
Why should you remove the air from the hydration bladder?
To avoid hearing the sound of water moving in the hydration bladder and guarantee optimum water flow for the whole of your MTB ride,How? Just turn the hydration bladder upside down once filled, direct the air bubbles towards the tube opening and suck them out. That's it! Now you can enjoy the quiet while riding. The walls of the hydration bladder won't stick together if you suck hard and the water flow will always be just right.
4
Tips
To avoid a plastic taste when drinking, we advise you to rinse the product 3 times before first use. After cleaning, leave the hydration bladder open to dry thoroughly. If the plastic taste won't go away, place the dry hydration bladder in the freezer for one night.
Information / Concept / Technology
Composition
Film : 70.0% Ethylene Vinyl Acetate, Film : 30.0% Polyethylene Air chamber : 100.0% Thermoplastic Polyurethane Handle : 100.0% Acrylonitrile Butadiene Styrene Sliding bar : 70.0% Ethylene Vinyl Acetate, Sliding bar : 30.0% Polyethylene Teat : 100.0% Silicon On/Off system : 100.0% Polypropylene Film/Tube connector : 70.0% Ethylene Vinyl Acetate, Film/Tube connector : 30.0% Polyethylene Tube/Valve connector : 100.0% Polyethylene

Product test
Our products and materials meet current standards relating to food contact and do not contain bisphenol A (BPA).

Stockage tips
Wash and dry the product before putting it away. Store in a clean and dry place. You can store your hydration bladder in the freezer to avoid mould forming.
Show results for