Men's Hiking Shoes (WATERPROOF) NH300 - Black

8383807

QUECHUA

Made for
Entry-level waterproof! These men's hiking boots are designed to withstand 2 hours’ walking in light rain. The rubber sole is more durable and offers more grip.
Sizes guide

This product is no longer in stock
Advantage
CushioningHoneycomb rubber sole adapted to natural paths.
GripCrossContact sole for optimum grip on natural terrain.
WaterproofWaterproof, breathable membrane, tested during a 2-hour walk.
Fitting comfortSole, insole (inner) in 5 mm thick polyurethane.
Impact protectionSynthetic stone guard on the front of the foot to protect you from stones.
Lightweight408 g per boot in size 8.
Warranty2 Years
Technical Information

1
CrossContact sole
The sole design is the product of a lengthy research process conducted in our laboratories, which has been combined with a special rubber formulation to optimise grip and traction. Each person needs different things from their footwear, so we are always searching for the best solution to cover everyone venturing on natural loose trails (e.g. forest paths).
2
Designed for use on off-road trails
Our walking boots are designed for use on off-road trails. Indeed, we choose the components of the sole and upper of our boots and test them to ensure that they are ideally suited to hiking on loose trails (e.g. forest paths made of soil) or rocky trails (e.g. rocky coastal paths). Road use (tarmac) may lead to premature wear on your boots and cause discomfort. They are not suitable for mountain walking.
3
How to choose the size of my walking boots
Try on both shoes, standing up, with the socks worn for hiking. Try several models, several sizes if necessary. Check two comfort points: the heel seating and the front of the foot on a downward slope. Avoid any pressure points when fitting. Don't hesitate to walk around the store. Break in your boots gradually during their first hikes to adapt them to your foot.
4
Laboratory Testing
Other laboratory tests are also conducted to validate the following elements: tearing of the eyelets and straps, gluing, toxicology, UV resistance, abrasion of the sole and the components of the upper, accelerated ageing.
5
Waterproofing test
The footwear equipped with a membrane is laboratory and field tested to ensure optimal waterproofing and breathability. First, the shoe is immersed in water while internal air pressure is applied to check that no bubbles form on the surface of the footwear. Next, shoes are fitted to a mechanical arm that simulates walking and half immersed in water so we can test that the inside remains perfectly dry.
6
3 levels of waterproofing
During the waterproofing test, we test 3 levels of waterproofing: 2000 flexes (around 2 hours of walking), 4000 flexes (around 4 hours of walking) and 8000 flexes (around 8 hours of walking). Naturally, after this test or in use, the boot regains its original waterproofing once dry. The NH150 low women's boots are waterproof for 2000 flexes.
7
How to maintain the waterproofing of your boots
We recommend spraying your boots several times a year with waterproof spray to restore the original water repellent properties and prevent stains on the outside of the boot.
8
The boot/sock combination plays an important role.
There are multiple factors which may cause blisters when you are walking: rubbing, a crease in the sock, moisture, a boot size that is too small or too big, etc. It is therefore important to choose the right size and to have socks made of the right material for your walking boots.
9
How to choose the material of my walking socks
Moisture must be effectively managed when hiking: We sweat, it’s bound to happen. If your boot is breathable, it will evacuate the moisture caused by your sweat: This means you need to choose a lightweight, breathable sock If your boots are waterproof, to protect you from moisture created by rain, you won’t make the same choice: choose a sock which will absorb your sweat, and direct it as far as possible away from your foot.
10
Which pair of socks go well with the NH300 WP boots?
These boots are waterproof. Although waterproof membranes are themselves breathable, they are not as good at eliminating perspiration as a truly ventilated shoe. We therefore recommend the NH100 mid socks which contain cotton that absorbs moisture and have a plush loop construction under the sock that keeps the moisture away from your foot. This is an excellent combination for reducing blisters.
11
Warranty
Our hiking boots are guaranteed for 2 years. Our commitment? To offer you long-lasting products that you can use on all your country walks. Because the products we like the most are those with a story behind them that is still continuing!
Information / Concept / Technology
Composition
Outer sole of : 100.0% Rubber - Butadiene Rubber Upper of : 50.0% Polyester, Upper of : 40.0% Polyurethane, Upper of : 10.0% Polyester - Recycled Lining and sock of : 100.0% Polyester

Product test
It is in France, at the foot of the Mont Blanc, that our design team imagined, thought up and designed the Quechua products. We test them in the field with other hikers to make sure that they are comfortable and durable. From the forest of Fontainbleau, to Brittany, to give just a few examples... We ventured out onto as many trails as possible, in all weather conditions. These moments involve a lot of discussions. We use this to get your feedback and prepare our future collections!

Stockage tips
Store in a dark, dry and well-ventilated place.
Show results for