Kid's Hiking Shoe WATERPROOF (Mid Ankle) MH500 - Green/Grey

8343067

QUECHUA

From

₹ 2,999.00

-33%

₹ 1,999.00

Reduced price! Kid's Hiking Shoe WATERPROOF (Mid Ankle) MH500 - Green/Grey

Made for
These children's hiking shoes are ideal for mountain footpaths thanks to the sole with very good grip, the reinforced upper and the waterproof membrane.
Sizes guide

Warning: Last items in stock!

Advantage
TractionThe sole is an excellent compromise for dry and muddy terrain.
WaterproofWaterproof membrane tested on an 8km walk in water up to the middle of the upper
CushioningComplete PU cushioning the full length of the foot for excellent comfort
LightweightWeighs only 334 grams per shoe in size 3.5.
FitVery good ankle support thanks to the semi-rigid upper.
Warranty2 Years
Technical Information

1
Sole grip
The design of the sole is the product of extensive research at our laboratories, combined with a special rubber formula to optimise grip and traction. As needs are not the same, we systematically seek the best trade-off for progressing in both loose terrain and dry terrain.
2
Waterproofing test
Having been both lab and field tested, the footwear fitted with the NOVADRY® technology guarantees optimum waterproofing and breathability. To start, they are immersed in water with pressurised air inside to check that no bubbles form on the surface of the boot. Next, the boots are fitted to a mechanical arm that simulates walking, half immersed in water so we can test that the inside remains perfectly dry.
3
Making waterproofing last longer
A shoe's waterproofing is often undermined by water getting in from the top of the shoe. To keep your feet dry for longer, it is therefore advisable to use a waterproof gaiter or mini-gaiter that will prevent not only water from getting inside through the top, but also pebbles, sand, etc. It is advisable to use a waterproof spray several times a year. This restores the original water-repellent properties and prevents staining.
4
Buying Tips
Allow children to try on both shoes, standing up, with the socks worn for hiking. Try on several models or sizes if necessary. Check two comfort points: the base of the heel and the front part of the foot going down. Avoid all pressure points when trying them on. Don't hesitate to allow then to walk around the store. Gradually start using you shoes during your first few hiking trips to break them in.
5
Which size should I select?
For hiking, do not hesitate to buy one size larger than the usual size to guarantee excellent comfort on the descent and to avoid toes rubbing at the tip of the shoe. Tip: keep your nails short and, before making your descent, check that your lacing prevents your foot from sliding towards the front of the boot.
6
Lab tests
Further laboratory tests were conducted to test the following elements: attachment of eyelets and webbing, assembly, toxicology, UV resistance, sole and upper component abrasion, accelerated ageing.
Information / Concept / Technology
Composition
Outer sole of : 100.0% Polyurethane Upper of : 50.0% Polyester, Upper of : 50.0% Polyurethane Lining and sock of : 100.0% Polyester

Product test
All our boots undergo use tests carried out around the Mont Blanc area by users who are representative of our target market, in conditions identical to those found in typical use.

Stockage tips
Store in a dark, dry and well-ventilated place.
Show results for