29x1.7/2.2 Inner Tube - 48mm Schrader Valve

8311106

DECATHLON

From

₹ 299.00

29x1.7/2.2 Inner Tube - 48mm Schrader Valve

Made for
29-inch tyres and wheels, with a cross-section ranging from 1.70 to 2.20.
Sizes guide

Advantage
Compatibility29" tyres with 1.70 to 2.20 cross section. ETRTO 44/57 - 622
WaterproofOptimised composition to ensure your inner tube has a good seal.
Warranty2 Years
Technical Information

1
How to choose your inner tube
Check the information indicated on the sidewall of the tyre (diameter and width). For example, 29x1.90 means that the tyre is 29 inches in diameter and 1.90 inches wide. On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 50-584 means that the tyre is 50mm wide with a 584mm internal diameter (approx. 26x2.00).
2
Removing an inner tube
Remove the old inner tube using B'Twin tyre levers
3
Checks to carry out before installing an inner tube
Check the condition of your tyre and replace it if necessary. Make sure no objects are lodged in the tyre. Check the condition of your tyre rim strip. A rim strip that is even slightly bent can cause punctures. Check that your rim does not have any other issues that could damage your inner tube
4
Mounting the inner tube
Watch our video before you start. Pre-inflate the inner tube slightly to avoid pinching. Insert the valve, making sure you are using the correct valve for your rim. Put the inner tube entirely inside the tyre so that it fits inside the rim. Take care not to pinch the inner tube when fitting.
5
Mounting the tyre
Start mounting the tyre at the valve. Finish mounting the tyre opposite the valve to avoid pinching the inner tube. Never mount your tyre with a tool or a tyre lever, as you risk pinching and puncturing the inner tube.
6
Inflating the tyre
Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI). Regularly check that your tyre is in the correct position as you inflate it.
7
Tip from the pros
To prevent any puncture from pinching and to achieve the best performance, we recommend checking and, if necessary, pumping up your front tyre before each ride.
8
Weight:
250 g
Information / Concept / Technology
Composition
Membrane : 100.0% Rubber - Synthetic

Product test
To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.

Stockage tips
Transport your inner tubes in a container that protects them against perforations (B'Twin transport container, original packaging, etc.).
Show results for